Module A-113 is a new sound source that derives from an incoming pulse signal four so-called subharmonics (German: Subharmonische). 

The term subharmonics was introduced by Oskar Sala in connection with his so-called Mixtur-Trautonium. 

A subharmonic means in this context a sawtooth wave (German: Kippschwinger) whose frequency is derived from a master frequency and the master frequency is an integer multiple in the range of 1...24 of the subharmonic - in other words: the master frequency is divided by an integer 1...24 to obtain the subharmonic. 

Pay attention that the output waveform of a subharmonic is sawtooth (as also used in the original Trautonium) and not sine. 

The term subharmonics is somewhat misleading. 

The master frequency comes e.g. from an A-110 or A-111 to the frequency input of the A-113. The frequency dividers of the 4 subharmonics is adjusted with up/down buttons as displayed with 2 character LED displays. The subharmonics are available as single outputs and as mix output with adjustable levels for the subharmonics. 

Two gate type control inputs enable to select between 4 different mixtures, i.e. 4 different settings of the frequency dividers. 

In the original Trautonium these are controlled by foot switches to switch between 3 mixtures while playing (the original Trautonium has only 3 mixtures available but with the 2 gate inputs of the A-113 four different settings can be adressed). 

Additionally the A-113 features a mixture memory with 50 presets. 

Each preset consists of 4 mixtures that can be selected with the gate inputs, each mixture contains the values of the 4 frequency dividers.

technical details

Width: 26HP 

Connections: 
Subharmonic 1 ouput 
Subharmonic 2 ouput 
Subharmonic 3 ouput 
Subharmonic 4 ouput 
(Square) input 
Foot Ctr (Gate) input 1 
Foot Ctr (Gate) input 2 
Mix ouput