Module A-160 is a frequency divider for clock/trigger/gate signals, designed to be a source of lower frequencies, particularly for rhythm uses. 
The Trigger input will take clock signals from, eg., an LFO, MIDI sync, or the gate from a MIDI-CV interface. 
At the outputs, you have access to the sub-divided clock signals, from half the clock frequency down to 1/64. 

The low/high levels of the output signals are 0V and about +10V. 
The A-160 also has a reset input. Whenever a reset signal is sensed, all outputs are set to zero, until the reset voltage disappears. 
The Clock Divider can be used in combination with the A-161 Clock Sequencer to produce stepped sequences with a length from one to eight events.

technical details

Width: 4HP 

Connections: 
Trigger input 
Reset input 
/2 output 
/4 output 
/8 output 
/16 output 
/32 output 
/64 output