LZX Industries

Displaying 1 to 10 (of 37 products)

1 2 3 4 [Next »]

Product Image	Item Name-	Price
	LZX Industries - Andor1 Deluxe Accessories Pack The Andor 1 Deluxe Accessories Pack includes the following parts: Wireless remote for navigating menus A/V cable for composite video and stereo RCA audio connections 8GB USB flash drive 6' HDMI cable Mounting screws in stock	99,00 €Details
	LZX Industries - Angles ANGLES is a 12HP ramp generator with 24 fixed outputs at 15 degree increments from 0 degrees (H-Ramp) to 345 degrees. It can also be used as a general purposed fixed ratio mixer by patching the inputs. It's a protractor for your patch! LZX Gen3... in stock	369,00 €Details
	LZX Industries - Castle 000 ADC (PCB & Frontpanel) The Analog to Digital Converter is used to change an analog input signal in to a 3-Bit data stream. Bias and Gain (+/-N) are used to scale and bias the input signal. Use this module to interface with the rest of the Castle series or as a hard zone... available in approx. 1 week	20,00 €Details
	LZX Industries - Castle 001 DAC (PCB & Frontpanel) The Digital to Analog Converter is a dual module to convert two 3-Bit data streams into two Analog approximations. Think of it as weighted summing mixers, with the MSB having the most amplitude, and LSB having least. Pair with the Analog to Digital... available in approx. 1 week	20,00 €Details
	LZX Industries - Castle 010 Clock VCO (PCB & Frontpanel) The Clock VCO is a square wave Voltage Controlled Oscillator with a linear response to CV. Used as a clock source for modules such as the Shift Register and Counter. Horizontal and Vertical frequency ranges. +12V Current Consumption: 9mA -12V... available in approx. 1 week	20,00 €Details
	LZX Industries - Castle 011 Shift Register (PCB & Frontpanel) The Shift Register is a 4 position memory of sorts. A bit is loaded from the DATA input at a logical “high” signal at the CLOCK input and appears at the Q0 output. At the next high Clock signal the bit is shifted from Q0 to Q1 and a new... available in approx. 1 week	20,00 €Details
	LZX Industries - Castle 100 Multigate (PCB & Frontpanel) The Multi-Logic Gate has 2 inputs and XNOR, XOR, NOR, OR, NAND, and AND outputs. Bill of material and schematic on LZX product page Attention: Castle Series printed circuit boards and EuroRack frontpanels are offered as a resource for intermediate... available in approx. 1 week	20,00 €Details
	LZX Industries - Castle 101 Quad Gate (PCB & Frontpanel) The Quad Gate uses a single quad logic chip and combines them in 4 different ways. A1 and B1 are combined and appear at OUT1. A2 and B2 are combined and appear at OUT2. OUT3 is a combination of A1 and OUT2. OUT4 is a combination of OUT1 and A2. Any... in stock	20,00 €Details
	LZX Industries - Castle 110 Counter (PCB & Frontpanel) The Counter is a 4-Bit clock counter/divider. Each successive output from Q0 to Q3 is half the frequency of the previous. When used as a binary word it counts from 1 to 16. There is also an end of count output as RCO, when the counter reaches 16 it... available in approx. 1 week	20,00 €Details
	LZX Industries - Castle 111 D Flip Flops (PCB & Frontpanel) The D Flip Flops are three D type Flip Flops that share a common Clock and Reset. Each Flip Flop can be thought of as a single bit sample and hold. The signal present at a D input is held either High or Low when the Clock signal is High, respective... available in approx. 1 week	20,00 €Details