New Products

Dark Time is an 2 x8 steps analog sequencer with CV/Gate, USB and Midi interface. It is planned in the first place as an add-on for the Dark Energy but may be used even

Module A-187-1 is a DSP based effects module. Four parameters of the selected digital effect are voltage controlled. The main effect (e.g. reverb, delay, pitch-shifter,

3,5 mm patch cords with Verbos-logo 5-pack gold plated contacts color: gray technical details Length: 60cm

3,5 mm patch cords with Verbos-logo 5-pack gold plated contacts color: gray technical details Length: 22cm

Module A-185-2 is a precision control voltage adder/buffer. Precision means that the amplification of the inputs without attenuators is exactly 1.00 and is suitable to

Module A-183-3 is a simple amplifier. It is DC coupled and can be used for both CV and audio signals. The maximal amplification can be switched between 1, 2 and 4 (in

Module A-183-2 is a simple voltage offset generator combined with an attenuator/polarizer for the CV input. This is how the A-183-2 works: At the two output sockets

Module A-183-1 is a simple passive dual attenuator. Passive means, that each unit is made of two sockets and a 50k linear potentiometer only. There are no active parts

Module A-182 is a simple passive multi-connector. In contrast to module A-180 each socket is equipped with a 3-position switch that allows to connect the corresponding

Two multiples with one 1/4 jack socket and two 3.5mm jack sockets each, upper multiple is wired monophonic, lower is wired stereophonic. technical details Width: 4HP

The A-180-3 is a dual buffered 1-in-3 multiple. The signal applied to the input socker appears as a buffered signal at the three output sockets. Each output has it's

Module A-180-1 is a simple multi-connector. It has eight inter-connected sockets, so that you can patch more inputs or outputs into any module. The sockets are split